S9/10KV Oil-immersed transformer
S9 series 10KV three-phase oil-immersed power transformer, the transformer body adopts a new type of insulation structure, improve the short circuit resistance;The iron core is made of high quality cold silicon steel sheet.High and low voltage windings are made of high quality oxygen-free copper wire and multi-layer cylindrical structure.All fastenings are treated with special treatment.The oil tank is of corrugated structure, and the lid and edge of the tank are fully welded or bolted, which basically extends the service life of transformer oil and insulation materials.
S11/10KV Oil-immersed transformer
S11-30 ~ 3150KVA/10KV series distribution transformers have remarkable energy-saving effect. They adopt new iron core materials, fully inclined three-seam structure and even magnetic circuit distribution, which greatly reduces no-load excitation current and no-load loss. S11 products, on the basis of S9 series, reduce no-load loss by 30% on average, reduce no-load current by 70%, and reduce noise by about 8 db.Install pressure release valve, signal thermometer, gas relay, etc. according to the standard requirements to ensure the safe operation of the transformer.It has the characteristics of reliable operation, small size, light weight, low noise, good technology, good heat dissipation, low temperature rise, no core structure, no pollution, no maintenance, high efficiency.
Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.
|Main Technical Parameters for 10KV level S9-M/S10-M/S11- M Series three-phase full-sealed non-excitaiton-tap-changing distribbution transformer|
|No-load loss(W)||On-load loss(W)||No load|
Qingdao Hengfengyou Electrical Engineering Co., Ltd. (hereinafter referred to as Hengfengyou) is a large-scale enterprise group with electricity transmission and distribution as its main business,which integrates scientific research, development, manufacturing and trade. After 30 years rapid economy development in China, Hengfengyou now is a leading R & D, manufacturing and service base for MV
, HV and ultra-HV power distribution equipment in China. At present,we have 50 senior technicians and more than 300 employees, with a complete sales and service system. Our products sell well at home and abroad, and our annual output value adds up to $100 million. .
At present, Hengfengyou has 6 wholly-owned and holding subsidiaries, which are respectively engaged in R & D, manufacturing and service of transformers, switchgear, package/unit substation, pole-mounted high-voltage vacuum circuit breakers, new energy, and electrical engineering.
For a long time, the company has maintained close technical exchanges and cooperation with domestic and foreign universities, scientific research institutes and electric power enterprises.
Hengfengyou independently designed and developed SCB series dry-type transformer and SC series oil immersed transformer. Our product performs with high operation efficiency, and obvious energy conservation. The overall performance index reaches the world's advanced level.
The company also maintains long-term strategic partnership with Schneider, ABB, Simens, Chint and other electric suppliers. We absorbed foreign advanced experience in electrical equipment production and independently designed and developed a series of substation equipment, which realized the automation and intelligence of the substation, and of which the performance has been highly recognized by the user at home and abroad. In the following five years, the company plans to build an intelligent workshop with an annual output of 100000 transformers.Then,the intelligent robot will replace 80% of the existing labor force, which will greatly improve the production efficiency, lower production cost, and produce more energy-saving, environmentally friendly, more safe and reliable the product for the users!
1.Pre sale service A. make technical solution B. send quotation, technical data sheet and drawing prepare power transmission plan, testing plan and shipment plan
2. In sale service supervise the manufacturing schedule totally in accordance with the plan b. send photos to customer during every manufacturing process(hold point) c. inform the customer one week before testing. d. quick response within 12 hours any time.
3. After sale service a.All parts are under Two Years Warranty with defects from manufacturer. All spare parts and component can be offered for free from the original manufacturer or HFY. b. Training We will provide free training to your technician free of charge at our factory site in Qingdao, China. The total training period would be 2 working days. All travel and related expensed would be at the purchaser's expense. c. Technical Documents: Original operation and service manuals, the service manual is completed with wiring diagram, block diagram and trouble shooting information. d. Installation Usually, clients can do the installation and operation by themselves when following the detailed English user manual. If clients want our technician do this work, please read the following terms: The initial installation is not included with the professional HFY team member. All installation with the Hengfengyou team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled. While Hengfengyou team member arrives at the site for a complete and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days excluding travel days. The actual installation days may vary, based on different machine mode. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below. When initial installation is being called for the Hengfengyou team required, the surcharge will be made in advance by the purchase at US$100/person/day plus all travel expenses. Travel expenses; local and destination transportation charges (air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily meals.
The Finished Project
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.